Hi all,
I’m using Spectacle for screenshots, and sometimes when using this application, the system simply starts to freeze, and then a large number of notifications appear.
It is a bug? Or maybe smth wrong with my hardware/configs?
OS: EndeaveourOS Mercury-Neo
Kernel: Linux 6.12.53-1-lts
Wayland version: 1.24.0-1
KDE version: 6.1.2
Extra: I have two displays.
How is this even remotely possible?
Even copying the details would give you lines such as:
KDE Plasma Version: 6.5.1
KDE Frameworks Version: 6.19.0
Qt Version: 6.10.0
You appear to have created your own system of reporting, but have actually put in extra details like ‘Wayland version’. and ‘KDE version 6.1.2’ which cannot co-exist on EOs unless you deliberately set it up and refused to update for a very long time.
We don’t usually refer to ‘Wayland version’ to be frank… but overall, I’m not surprised your system is messed up.
6.12.53-1 is not a standard Linux kernel release, and is certainly not supported on EndeavourOS - the closest reported LTS kernel on my (not EOs) system would likely be 6.12.56-1 (which is marked LTS).KDE version 6.1.2 is not a supported release of KDE Plasma - Arch and EOs are currently running 6.5.1EndeaveourOS does not exist, so this is possibly a typing error (a reason we use copy/paste, or select/middle click paste) referring to EndeavourOS, or it could be an indication that you have installed a deeply faked operating system made to look similar in some ways.I would suggest you try pasting the result of:
inxi -zv8 | grep -vE 'MAC|UUID|IP'
Otherwise I suspect that this will go nowhere (or perhaps invite some wild guessing from the more enthusiastic members).
Meanwhile:
pacman -Syu - this is a subject not related to KDE or Plasma.This is a fundamental requisite you must satisfy before you can ask for any assistance.
Also, you must be able to supply at least any error messages (which you can simply copy and paste) from your terminal when trying to run spectacle.
EOs isn’t a simple GUI distribution, some more advanced skills are required.
Hey Ben,
Sorry, I made a mistake and didn’t see it.
inxi -zv8 | grep -vE 'MAC|UUID|IP'
System:
Kernel: 6.12.53-1-lts arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-linux-lts
nvme_load=YES nvidia_drm.modeset=1 loglevel=3
Desktop: KDE Plasma v: 6.4.5 tk: Qt v: N/A info: frameworks v: 6.19.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: EndeavourOS base: Arch Linux
Sorry again.
But again, not the correct output for the command… do you know how to run commands in the terminal?
Mine looks like this:
➤ inxi -zv8 | grep -vE 'MAC|UUID|IP'
System:
Kernel: 6.17.6-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.17-x86_64
udev.log_priority=3 amd_pstate=passive snd_hda_intel.power_save=0
systemd.battery_check=false highres=on acpi_irq_balance nokaslr
random.trust_cpu=on cpuidle.governor=teo rcupdate.rcu_expedited=1
rd.systemd.show_status=true mitigations=off clocksource=tsc
transparent_hugepage=never numa_balancing=disable numa=off pcie_aspm=off
nowatchdog nmi_watchdog=0 audit=0
Desktop: KDE Plasma v: 6.5.1 tk: Qt v: N/A info: frameworks v: 6.19.0
wm: kwin_wayland with: krunner vt: 2 dm: SDDM Distro: Manjaro
base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: B550M Steel Legend
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: P2.30 date: 02/24/2022
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 16 GiB available: 14.99 GiB used: 7.36 GiB (49.1%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 128 GiB slots: 4 modules: 2 EC: None
max-module-size: 32 GiB note: est.
Device-1: Channel-A DIMM 0 type: no module installed
Device-2: Channel-A DIMM 1 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 3600 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: Kingston
part-no: KF3600C17D4/8GX serial: <filter>
Device-3: Channel-B DIMM 0 type: no module installed
Device-4: Channel-B DIMM 1 type: DDR4 detail: synchronous unbuffered
(unregistered) size: 8 GiB speed: 3600 MT/s volts: note: check curr: 1
min: 1 max: 1 width (bits): data: 64 total: 64 manufacturer: Kingston
part-no: KF3600C17D4/8GX serial: <filter>
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 3 level: v3 note: check built: 2021-22
process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA500012
Topology: cpus: 1x dies: 1 clusters: 1 cores: 6 threads: 12 tpc: 2
smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB
desc: 6x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 2370 min/max: 404/4466 boost: enabled scaling:
driver: amd-pstate governor: schedutil cores: 1: 2370 2: 2370 3: 2370
4: 2370 5: 2370 6: 2370 7: 2370 8: 2370 9: 2370 10: 2370 11: 2370 12: 2370
bogomips: 93423
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
constant_tsc cpb cppc cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
cqm_occup_llc cr8_legacy cx16 cx8 de debug_swap decodeassists erms
extapic extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt
ht hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni
popcnt pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep
sha_ni skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3
stibp succor svm svm_lock syscall tce topoext tsc tsc_scale umip
user_shstk v_spec_ctrl v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall
vpclmulqdq wbnoinvd wdt x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt
xsaves xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Vulnerable
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 status: Vulnerable: __user pointer sanitization and
usercopy barriers only; no swapgs barriers
Type: spectre_v2 status: Vulnerable; IBPB: disabled; STIBP: disabled;
PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsa status: Vulnerable
Type: tsx_async_abort status: Not affected
Type: vmscape status: Vulnerable
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series /
Radeon Mobile Series] driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
ports: active: HDMI-A-1 empty: DP-1,DP-2 bus-ID: 04:00.0
chip-ID: 1002:1638 class-ID: 0300 temp: 46.0 C
Display: wayland server: X.org v: 1.21.1.20 with: Xwayland v: 24.1.9
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: HDMI-A-1 model: LG (GoldStar) TV serial: <filter> built: 2011
res: mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 305 gamma: 1.2 chroma: red:
x: 0.639 y: 0.329 green: x: 0.298 y: 0.600 blue: x: 0.149 y: 0.059 white:
x: 0.314 y: 0.329 size: 160x90mm (6.3x3.54") diag: 184mm (7.2")
ratio: 16:9 modes: 1920x1080, 1680x1050, 1400x1050, 1600x900, 1280x1024,
1440x900, 1360x768, 1280x800, 1152x864, 1280x720, 1024x768, 800x600,
720x576, 720x480, 640x480, 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.2.5-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
renoir ACO DRM 3.64 6.17.6-1-MANJARO) device-ID: 1002:1638 memory: 500 MiB
unified: no display-ID: :0.0
API: Vulkan v: 1.4.328 layers: 1 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV RENOIR) driver: mesa radv v: 25.2.5-arch1.2
device-ID: 1002:1638 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Renoir/Cezanne HDMI/DP Audio
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 04:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio
vendor: ASRock driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.17.6-1-MANJARO status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.9 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASRock driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: f000 bus-ID: 03:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
broadcast: <filter>
Info: services: NetworkManager,systemd-timesyncd
Bluetooth:
Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver: btusb
v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-2.1:3
chip-ID: 0a12:0001 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: yes class-ID: 6c0104
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 9.32 TiB used: 3.81 TiB (40.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 4B6Q scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: MD04ACA400
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: FP2A scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD40EZAX-00C8UB0 size: 3.64 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 1A01
ID-4: /dev/sdd maj-min: 8:48 vendor: Western Digital
model: WD20EZRX-00DC0B0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: N/A serial: <filter> fw-rev: 0A80
scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 232.59 GiB size: 227.88 GiB (97.98%)
used: 146.3 GiB (64.2%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 label: ROOT
uuid: a0074377-fd97-4125-9151-1b09cc8e32cb
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 468 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1 label: N/A
uuid: F99D-EAF9
ID-3: /mnt/T4 raw-size: 3.64 TiB size: 3.58 TiB (98.40%)
used: 1.27 TiB (35.5%) fs: ext4 dev: /dev/sdb1 maj-min: 8:17 label: T4
uuid: 1e85632e-1c5f-4da4-a229-e349fba9efc9
ID-4: /mnt/W2 raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 1.24 TiB (67.9%) fs: btrfs dev: /dev/sdd1 maj-min: 8:49 label: W2
uuid: 7a89257a-6b14-46ba-85d9-55f079184774
ID-5: /mnt/W4 raw-size: 3.64 TiB size: 3.58 TiB (98.40%)
used: 1.16 TiB (32.5%) fs: ext4 dev: /dev/sdc maj-min: 8:32 label: W4
uuid: 05e296c6-eb11-4d00-89b1-c8318c4549c5
Swap:
Kernel: swappiness: 50 (default 60) cache-pressure: 100 (default) zswap: yes
compressor: zstd max-pool: 20%
ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2
file: /swapfile
ID-2: swap-2 type: zram size: 16 GiB used: 3.24 GiB (20.2%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-2: 1-7:2 info: Genesys Logic Hub ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-8:3 info: ASRock LED Controller type: HID
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 26ce:01a2 class-ID: 0300
serial: <filter>
Hub-3: 2-0:1 info: super-speed hub ports: 4 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 2-2:2 info: SanDisk 3.2Gen1 type: mass storage
driver: usb-storage interfaces: 1 rev: 3.2 speed: 5 Gb/s (596.0 MiB/s)
lanes: 1 mode: 3.2 gen-1x1 power: 896mA chip-ID: 0781:55ad class-ID: 0806
serial: <filter>
Hub-4: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-5: 3-2:2 info: ASMedia ASM1074 High-Speed hub ports: 4 rev: 2.1
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 174c:2074 class-ID: 0900
Device-1: 3-2.1:3 info: Cambridge Silicon Radio Bluetooth Dongle (HCI
mode) type: bluetooth driver: btusb interfaces: 2 rev: 2.0
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 chip-ID: 0a12:0001
class-ID: e001
Hub-6: 3-2.3:4 info: Huasheng USB2.0 HUB ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA
chip-ID: 214b:7250 class-ID: 0900
Device-1: 3-2.3.1:5 info: 2.4G Wireless type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s)
lanes: 1 mode: 1.1 power: 100mA chip-ID: 32c2:0066 class-ID: 0301
Device-2: 3-2.3.3:6 info: China Resource Semico 2.4 Wireless Device
type: HID,keyboard,mouse driver: hid-generic,usbhid interfaces: 4 rev: 1.1
speed: 12 Mb/s (1.4 MiB/s) lanes: 1 mode: 1.1 power: 100mA
chip-ID: 1a2c:8fff class-ID: 0300 serial: <filter>
Hub-7: 4-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Hub-8: 4-2:2 info: ASMedia ASM1074 SuperSpeed hub ports: 4 rev: 3.0
speed: 5 Gb/s (596.0 MiB/s) lanes: 1 mode: 3.2 gen-1x1 power: 8mA
chip-ID: 174c:3074 class-ID: 0900
Hub-9: 5-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 chip-ID: 1d6b:0002
class-ID: 0900
Hub-10: 6-0:1 info: super-speed hub ports: 2 rev: 3.1
speed: 10 Gb/s (1.16 GiB/s) lanes: 1 mode: 3.2 gen-2x1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 58.9 C mobo: N/A gpu: amdgpu temp: 46.0 C
Fan Speeds (rpm): N/A
Repos:
Packages: 2755 pm: pacman pkgs: 2728 libs: 546 tools: octopi,pamac,paru,yay
pm: flatpak pkgs: 27
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.kku.ac.th/manjaro/unstable/$repo/$arch
2: http://ossmirror.mycloud.services/os/linux/manjaro/unstable/$repo/$arch
3: https://kartolo.sby.datautama.net.id/manjaro/unstable/$repo/$arch
4: https://mirrors.tuna.tsinghua.edu.cn/manjaro/unstable/$repo/$arch
5: https://mirror.nyist.edu.cn/manjaro/unstable/$repo/$arch
6: https://mirror.nju.edu.cn/manjaro/unstable/$repo/$arch
7: https://mirrors.jlu.edu.cn/manjaro/unstable/$repo/$arch
8: https://mirrors.pku.edu.cn/manjaro/unstable/$repo/$arch
9: https://mirror.xeonbd.com/manjaro/unstable/$repo/$arch
10: https://mirror.phoepsilonix.love/manjaro/unstable/$repo/$arch
11: https://mirror.archlinux.tw/Manjaro/unstable/$repo/$arch
12: https://mirrors.ustc.edu.cn/manjaro/unstable/$repo/$arch
13: https://ftp.tsukuba.wide.ad.jp/Linux/manjaro/unstable/$repo/$arch
14: https://mirrors.xtom.jp/manjaro/unstable/$repo/$arch
15: https://mirrors.sjtug.sjtu.edu.cn/manjaro/unstable/$repo/$arch
16: https://mirror.mobinhost.com/manjaro/unstable/$repo/$arch
17: https://mirror.dc.uz/manjaro/unstable/$repo/$arch
18: https://manjaro.grena.ge/unstable/$repo/$arch
19: https://mirrors.aliyun.com/manjaro/unstable/$repo/$arch
Processes:
CPU top: 5 of 382
1: cpu: 204% command: plasmashell pid: 47127 mem: 537.3 MiB (3.4%)
2: cpu: 9.1% command: konsole pid: 49142 mem: 140.9 MiB (0.9%)
3: cpu: 7.2% command: firefox pid: 41911 mem: 507.6 MiB (3.3%)
4: cpu: 4.9% command: Plex pid: 10748 mem: 95.2 MiB (0.6%)
5: cpu: 2.6% command: fish pid: 49163 mem: 11.1 MiB (0.0%)
Memory top: 5 of 382
1: mem: 1253.9 MiB (8.1%) command: firefox pid: 44600 cpu: 1.8%
2: mem: 537.3 MiB (3.4%) command: plasmashell pid: 47127 cpu: 204%
3: mem: 507.6 MiB (3.3%) command: firefox pid: 41911 cpu: 7.2%
4: mem: 381.1 MiB (2.4%) command: baloo_file pid: 1589 cpu: 0.1%
5: mem: 333.5 MiB (2.1%) command: firefox pid: 44913 cpu: 0.4%
Info:
Processes: 382 Power: uptime: 5h 54m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 5.97 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Compilers: clang: 21.1.4 gcc: 15.2.1 Shell: fish v: 4.1.2 default: Zsh
v: 5.9 running-in: konsole inxi: 3.3.39
However, from the parts that you printed I would suggest that your system is not a supported EndeavourOS system, you need to synchronise and update it properly… something beyond the scope of this forum.
I understand, thanks for the help. I will continue looking for a solution.
There will be no solution if you cannot successfully synchronise your system with pacman -Syu
I’m running pacman -Syu and waiting for it to finish.
Ok, if that is successful then I would suggest you then create a new user with a clean desktop and verify the problem that way.
If the problem exists on a freshly synchronized system then there might be a bug reported in the EOs forum.
If the problem does not exist with a fresh user then you know it is your user data.
Everything seems okay.
I asked about it in KDE Discuss because I recently started using an OS with KDE, and if I understand correctly, this app came pre-installed.
I previously used Endeavouros with Cinnamon and didn’t have this problem.
Thanks again for your answers and patience.
It’s all good - there are a lot of things to learn and I’m happy you figured it out.